Angle Brackets – Zinc Plated

Angle brackets are suitable for supporting or bracing purposes and are zinc plated for added protection.

Strong Hold Bracket

Need help installing our lipped brackets outside, check out our DIY video with 5 easy steps for installation.

Product Code A (mm) B (mm) C (mm) Thickness (mm) Load Rating
AZ04 50 50 20 3.5 100
AZ05 75 50 20 3.5 45
AZ06 75 75 20 4 50
AZ07 100 75 20 4 150
AZ08 100 100 20 4 75
AZ09 125 100 20 4 75
AZ10 125 125 20 4 75
AZ11 150 125 20 4 40
AZ12 150 150 20 4 25
AZ14 200 150 25 4.5 30
AZ18 250 200 25 4.5 25

Load rating test specifications:

  • Load rating tested at 415mm distance between 2 brackets
  • Bracket is fastened to wall using shortest side of bracket
  • Brackets tested in the orientation below:


Stayed Bracket Orientation for Load Rating

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

Angle brackets are suitable for supporting or bracing purposes and are zinc plated for added protection.


  • For bracing or added support
  • Zinc plated for added protection
  • Available in a variety of sizes
  • Predrilled for fasteners


  • Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).
  • Appropriate heavy duty fasteners should be used.
  • Do not use plastic wall plugs to fix brackets to walls under any circumstances.
  • Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.