Pressed Reinforcing Zinc Plated Bracket

Pressed Reinforcing angle bracket has a pressed metal finish and rounded edge for strength and stability.

Pressed Reinforcing Bracket

Product Code A (mm) B (mm) C (mm) T (mm)
PRB030 30 30 20 1
PRB050 50 50 20 1
PRB075 75 75 20 1
PRB100 100 100 20 1

Load rating test specifications:

  • Load rating tested at 415mm distance between 2 brackets
  • Bracket is fastened to wall using shortest side of bracket
  • Brackets tested in the orientation below:


Stayed Bracket Orientation for Load Rating

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

Pressed Reinforcing angle bracket has a pressed metal finish and rounded edge for strength and stability. It is ideal for small repair jobs, such as furniture and may be used for chair bracing.


  • Compact design
  • Zinc plated steel for corrosion resistance
  • Pre-drilled for fasteners


  • Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).
  • Appropriate heavy duty fasteners should be used.
  • Do not use plastic wall plugs to fix brackets to walls under any circumstances.
  • Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.